Pulse PMX1604 Uživatelský manuál

1

10 STEREO AUX RETURN SOCKETBALANCED/UNBALANCED 6.35mm (

11PHONES 6.35mm (¼") SOCKETConnect headphones to the mixer via this socket so you can listen to individual channels, change settings and listen t

12STEREO AUX RETURNS DIALSThe STEREO AUX RETURN 1 control determines the level of signal in the main mix. If STEREO AUX RE-TURNS 1 is used as effects

13MIX fader to lower the signal levels. Sig-nals may be distorted if the signal levels are set to high. ALT 3-4 outputs are unbalanced and carry the s

14SPECIFICATION TABLEPower230V AC 50HzMixer specPMX1204: 2 x 200Wrms / 8 ohms 2 x 300Wrms / 4 ohmsPMX1604: 2 x 300Wrms / 8 ohms

15Cable connectionsYou are going to use a large amount or cable that run to and fro from your console and have different plugs connected. When running

2SAVE THESE SAFETY INSTRUCTIONSThank you for purchasing our product. To assure the optimum performance, please read this manual carefully and keep it

3• This product has a 12 month warranty. This warrant will be voided if it ap-pears the product has been opened, modied or repaired by an unauthori

4• Do not overload wall outlets or extension cords, as this can result in re or electric shock (MAX 3000W).• Follow all warnings and instructions mar

5BACK PANELAll the connections on this page our found on the back panel of the mixer PHANTOM POWER switchThis switch activates and deactivates the Pha

6SPEAKON™ SOCKETS AND SPEAKER TERMINAL POSTS - These speakon™ connectors or Terminal posts are the output of the built in power amplifier, (see spec t

7FRONT PANELAll the various controls will be described in this manual in sections. So before you start to read what each piece of equipment does nd i

8EQUALISER. HF,MF, LFThere are 3 dial controls to the equaliser, these are HF (high frequency above 12kHz), MF (medium frequency around 2.5kHz) and LF

9right. In the middle, at the 12 o’clock position, the sound in each channel is evenly distributed.MUTE - Mutes the sound from the main mix and redi-r